GLASSWOOL PIPE SECTIONS

Pipe Sections are manufactured with high - density glass wool, for the insulation of heated and chilled pipes.

In aluminum foil faced pipe sections, there is a 5 cm wide adhesive flap longitudinally. Transversal butt joints between two pipe sections are sealed with a self - adhesive aluminum - foil tape. This application prevents water vapor transmission. Pipe Sections are marketed un-faced or faced with aluminum foil.

Application Fields:

· All kinds of pippins of central heating systems

• All kinds of industrial piping insulation
• All kinds of cooling and chilling systems
• Against frost in piping
• For sound insulation purposes in pressurized piping
• Piping of solar heating systems

GLASSWOOL PREFABRICATED DUCT

The product is a rigid glass wool board with reinforced aluminum foil facing on the outside, and black glass tissue on the inside, which can be folded to get thermal and sound insulated air duct systems.. Special products are also manufactured upon request

Application Fields:

Prefabricated Duct is used to fabricate straight sections

and duct fittings for heating, cooling and dual-temperature duct systems in all kinds of commercial, institutional and residential constructions.

GLASSWOOL SUSPENDED CEILING BOARDS

Suspended Ceiling is an aesthetical and decorative ceiling system with various functions. It is manufactured by facing one side of the semi-rigid glass wool boards with PVC. It is decorative and conceals the ductwork, plumbing, sanitary and electrical installations. It is easy to assemble and remove whenever required, provides access to the installation concealed behind. A grid system is formed out of aluminum sections below the original ceiling line. It modifies the acoustics of the environment, prevents echoing, absorbs noise and makes the speech and conversation clear and audible.

Application Fields:

• Office buildings and business centers
• Industrial buildings
• Shopping and amusement center
• Conference halls, Educational buildings
• Hotels, Sports halls, etc.
• Special products are also manufactured upon requests.

GLASSWOOL BUILDING and DUCT BLANKETS

Building Blankets are highly resilient and homogeneous insulation rolls manufactured from fine glass fibers of 3.5 - 4.5 microns and free from coarse fibers, shot and other impurities. They are manufactured either un-faced or can be faced with yellow glass tissue or aluminum foil as vapor barriers. The aluminum foil is reinforced with glass yarn mesh and laminated over Kraft paper, both of which provide resistance against tearing.

They can also be faced with Kraft paper. They provide comfort, reduction in cooling and heating costs and condensation control.

Duct Blankets are designed to be used externally for the thermal and sound insulation of duct systems. Duct Blankets are manufactured from resilient glass fiber blankets laminated on aluminum foil vapor barrier with 5 cm flanges along the edge. Duct Blankets are faced with either aluminum foil or black glass tissue.

GLASSWOOL BOARDS

WALL BOARDS	SEMI-RIGID BUILDING BOARDS	RIGID BOARDS	DUCT BOARDS
Wall Boards can be manufactured either un-faced or silicone-spread. They are non-hygroscopic and water-repellent. Wall Boards are used as a water-repellent insulation material	Semi-Rigid Building Boards are manufactured un-faced or faced with aluminum foil or black glass tissue and silicone-spread. They are non-hygroscopic and water-repellent. It is used as a water-repellent insulation material treated with silicone, under the exterior cladding of the buildings, for; Sound-absorbing constructions, insulation of solar collectors.	Rigid Boards are specially developed, high density, coarse glass fiber slabs, with high mechanical resistance. Rigid Boards are manufactured to provide thermal and sound insulation all in one application and are installed under floating screed. They preserve these characteristics without any alteration for long years. Rigid Boards can be manufactured either un-faced or faced with PVC, aluminum foil or glass tissue	Duct Boards are semi-rigid boards manufactured for the interior or exterior thermal and sound insulation of duct systems. Duct Boards are faced either with vapor proof aluminum foil vapor barrier or black glass tissue.

ROCKWOOL KALIBEL

Kalibel is a composite product consisting of a high-density rock wool board and a 12.5 mm thick gypsum board laminated together. It is used for thermal and sound insulations on the walls of both new and existing buildings. It can be manufactured with or without aluminum foil vapor barrier (optional) taking place between the gypsum board and rock wool or glass wool insulation.

It is used as interior insulation for the exterior walls. The boards are manufactured at wall height for ease

and speed of application It is also used for construction of lightweight partition walls with sound insulating property.

ROCKWOOL INDUSTRIAL BOARDS

Rockwool industrial boards are widely used for the thermal insulations and fire safety of buildings, high temperature equipment and installations. They can be un-faced or faced with either aluminum foil or glass tissue. They have a specific character to attenuate the sound and vibrations issued by such equipment and installations.

Application fields:

• All kinds of high-temperature industrial equipment and installations,
• Boilers,
• Double-shelled equipments,
• Ducts, electro-filters, furnaces,
• Walls and installations in ships and other vessels,
• For the fire protection of all industrial facilities and buildings, especially steel structures.

ROCKWOOL FLOOR BOARDS

Rockwool floorboards are specially developed high-density products with high mechanical resistance. The stiffness of Rockwool floorboards, offer high impact sound insulation as well as thermal insulation. They preserve these characteristics without any alteration for years. They are manufactured un-faced.

Application fields:

They are used under floating screed of reinforced concrete.

Due to their high compressive strength, these boards are utilized

· on floors with static and live loads,

· on the floors of multistory buildings, industrial buildings and

under vibrating equipment.

ROCKWOOL FLAT ROOF BOARDS

Rockwool flat roof boards are manufactured either un-faced or coated with bitumen. They are high-density boards with high load-bearing strength and are utilized for the thermal and sound insulations of flat, inclined and shaded roofs of corrugated metal, reinforced concrete or timber. Bitumen coated Flat Roof Boards are covered on one face with glass tissue reinforced bitumen. This layer ensures the adherence for the waterproofing membrane.

Application fields:

· Thermal insulation of all kinds of metal and timber roofs

· Thermal and sound insulations of reinforced concrete roofs, flat or inclined

· Waterproofing applications, under self-protective membranes or reflective gravel layers.

EXPANDED POLYSTYRENE BOARDS

Expanded Polystyrene Boards are manufactured with the expansion method from dense, small beads of polystyrene. It is easy to cut and install, resistant to compression, provides high thermal insulation and does not cause corrosion.

Expanded Polystyrene Moulds are also produced for packaging purposes. They are designed and shaped to fit the shape of the product to be packed. They provide secure transportation of products such as televisions, video-players, computers, mini tape recorders, vacuum cleaners, water heaters, refrigerators, kitchen ovens, washing machines etc. from the manufacturer to the consumer.

Application fields:

· Cold storage constructions, Commercial refrigerators, Chilled vehicles

· Expansion joints, Pre-cast concrete elements

· Flat roofs, Cavity walls

· Behind external surface claddings, Behind internal surface linings

· Decoration purposes

FOAMBOARD (EXTRUDED POLYSTYRENE)

Foamboard is polystyrene foam insulation extruded into boards by a process, which develops continuous skin surfaces and closed-cell structure. This uniform structure gives high insulating values, superior moisture resistance and compressive strengths up to 500 kPa.

Application fields:

· Under the exterior cladding of the buildings.

· For attic ventilation

· In double-cladded wall constructions, wall furring

· Cavity wall insulation

· Foundation, perimeter, crawl space insulations

· Under slabs with dead and live loads up to 150 kPa.

· Inverted flat roof constructions.

· Floors on natural ground, Cold storage floors.